|Home||» Products||» Cooling Heating Coils||» Steam Coil|
Our firm has carved a distinct niche for ourselves by providing quality gamut of Steam Coil to our respected clients. The offered coil is precisely manufactured under the stern observation of our deft professionals by making use of quality tested raw materials and cutting-edge techniques in compliance with set market standards. The provided coil is used in pulp dryer, paper machine ventilator coils, boilers and many more for heating the air when steam is available. Additionally, this Steam Coil is available in different specifications at negotiable prices.Details:
Our Steam Coil are fabricated with heavy walled copper tubes and headers. We use cutting edge technology and sophisticated engineering while rolling out these Industrial Steam Coils. Vents and drain are standard on all header coils. Custom casing, fin material, and circuiting are available for almost any application. These Water Coil are strictly fabricated in compliance with the set standards of the industry.
Some specifications regarding Precession Steam Coils are listed below;
Fin Material Options:
Corrugated plate type fin that is die-formed. Fin collars are full-drawn to provide accurate control of fin spacing and maximum contact with tubes. Standard Aluminium fin 0.13mm thick with optional (0.15mm). Optional copper and Blue coated fins thicknesses available are (0.12mm) (0.13mm) and (0.15mm). Fins per inch available 4 through 14.
All tubes import from across the globe to meet international standard. We are using hairpin at one side of coils. Return bends are manufactured with seamless copper tube with 0.91mm thick. Tubes are mechanically expanded to form an interference fit with fin collars
5/8" O.D. x 0.42mm wall thickness standard with optional wall thickness of (0.56mm) (0.71mm) and (0.91mm)
1/2" O.D. x 0.42mm wall thickness standard with optional wall thickness of (0.56mm) (0.71mm) and (0.91mm)
3/8" O.D. x 0.42mm wall thickness standard with optional wall thickness of (0.56mm) (0.71mm) and (0.91mm)
Rows available are 1, 2, 3, 4, 5, 6, 8, 10 and 12.
Mild steel copper or Stainless steel header that provide a parallel surface to the coil tube for strong brazing joints. All circuiting is designed to gravity-drain with the coil mounted vertically and tubes running horizontally.
Using 16-gauge minimum thickness material, flanges are die-formed to permit easy stacking and mounting. Intermediate tube supports are supplied on coils over 44" fin length with an additional support every 42" multiple thereafter.
Casing Material Options:
Galvanized steel standard with optional stainless steel, aluminium and copper.
All brazed joints utilize high temperature filler metals. Manifold connections are brazed with filler metal containing at least 5% silver.
Testing & Performance
All coil assemblies are tested at 400 psig using dry nitrogen, submerged under water. Standard construction is suitable for 250 PSI and up to 300 degrees F.
PERFORMANCE IS CERTIFIED under REVLON.